Clip the purple wire to the orange/white wire in the strobe board connector. The connector is at the bottom left of the raised playfield, and its harness runs up behind the backboard. We have switched from the telephone style connector shown to a standard squeeze style. MAKE SURE THE WIRES ARE COMPLETELY THROUGH THE CENTER OF THE CONNECTOR AND THEN SQUEEZE WITH ROBO GRIPS TO LOCK TIGHT AND "BITE" THE WIRES. HAVE A PAPER TOWEL TO WIPE OFF ANY EXCESS THAT LEAKS FROM THE CONNECTOR AFTER TIGHTING. A credit card can be used to push the wire in the connector.

Here are the instructions for installing the Williams Attack from Mars pinball machine shaker motor harness.

< Prev 2 of 6 Next >

Clip the purple wire to the orange/white wire in the strobe board connector. The connector is at the bottom left of the raised playfield, and its harness runs up behind the backboard. We have switched from the telephone style connector shown to a standard squeeze style.
MAKE SURE THE WIRES ARE COMPLETELY THROUGH THE CENTER OF THE CONNECTOR AND THEN SQUEEZE WITH ROBO GRIPS TO LOCK TIGHT AND "BITE" THE WIRES. HAVE A PAPER TOWEL TO WIPE OFF ANY EXCESS THAT LEAKS FROM THE CONNECTOR AFTER TIGHTING. A credit card can be used to push the wire in the connector.